How To Access Router Settings From Phone Without Internet Connection

This is a common question in habitation networking, as users often need to access the router to change some settings, only don't have a LAN/ethernet/network cable to plug into ane of the ports on the dorsum. Can we however practise this if we aren't plugged into the router directly?

It'south not always understood that y'all don't actually need to be connected to the router by cablevision to access information technology's settings. Yous can also do it if you are continued by Wi-Fi, every bit long as you know the router's login credentials and have access to any browser on a device that'due south continued to it.

Hither are the general steps to connect to login to a router's settings via Wi-Fi:

Connect to your router'due south Wi-Fi if you oasis't already.
Type your router'south IP accost into any browser address bar
IP is oftentimes 192.168.0.1, 192.168.ane.1 or 192.168.1.254
Other IPs are 192.168.1.ii or 10.0.0.1
Type in the admin/password
The IP/admin/countersign are on the back of the router.
This should log you into the router settings.

If you tin can't physically go access to the router to go login credentials, you tin can normally find or guess them, so it'southward no big deal. However, if yous aren't even connected to the router'south Wi-Fi, and you can't plug a cable in, y'all won't exist able to access the settings. You lot demand to establish a wired or wireless connectedness of some form to the router to change settings.

Let's run through how you can practice this though, without needing a network cable.

Step #1 – Connect To Your Router via Wi-Fi

This is the commencement essential step to be able to admission a router'due south settings. You need to exist either plugged into it with a LAN cablevision, or at least connected to information technology via Wi-Fi if you don't have a cable.

To do this, you but demand to find the router'south username/SSID and Wi-Fi password, which are always on the dorsum of it on a sticker somewhere. Something similar this:

You so demand to search for your router'south SSID on the listing of nearby wireless networks on any device. The default SSID usually denotes either the router brand or your ISP (eg Comcast45667 or Netgear23456)

Note that the Wi-Fi username/SSID/network name and Wi-Fi password (at the height) are carve up from the router login credentials – login IP, admin/password (listed underneath). The one-time are used to connect to the router's Wi-Fi to actually utilise the internet; the latter are used to admission the router settings to change them. To change the settings, you lot commencement need to be connected to the router though, so you need to get the Wi-Fi password if you don't take a cable.

If yous don't know the Wi-Fi countersign of the router considering it's been changed from the default, but Practice have physical access to information technology and it's a newer model, you can employ the WPS pairing push to automatically connect to it. Just enable the WPS feature on your device for a few seconds, and and so press or enable WPS on your router to pair up, and y'all should connect upwardly to it without needing the countersign.

If you tin't connect to your router's Wi-Fi considering you don't know the SSID/password, and you lot can't become to the router to find these details, then at that place'south nix you lot can practice. You need to have either a wired LAN cable (click here to get 1 from Amazon if you don't have one), or Wi-Fi connexion to the router to exist able to access the settings. Y'all'll have to find a fashion to go access somehow.

Footstep #two – Enter Your Router'southward Login Credentials

One time you're really continued to the router via Wi-Fi, yous can so login to information technology'due south settings from any device that'due south hooked up to it, even via Wi-Fi.

You just demand to firstly type the router's IP accost into any browser address bar of whatsoever continued device. The exact login IP is plant forth with the admin/password on the sticker on the back every bit shown to a higher place, and then check this if you can.

Log in to your router, using the login IP/admin/password you lot constitute before. The router login is oftentimes 192.168.0.1, 192.168.1.1 or 192.168.one.254 or may exist something dissimilar. Bank check the sticker on the back of your router.

Type in the admin and password – once again will exist on the router somewhere or online.

If someone has changed these so you lot'll need to get the details off them or do a full factory reset of your router to reset all logins to default. There's usually a hole on the router you stick a safe pivot into for several seconds to do this, or pressing and holding the reset push for 10 seconds does information technology on some routers. This volition revert all login details to what'south on the sticker on the back.

What If I Don't Have Physical Access To The Router?

All of this can run into a brick wall if you can't actually get direct access to the router to a find the login credentials. If yous don't even know the Wi-Fi network password for the router, and so there's nada you can do.

If you are at to the lowest degree continued to the router via Wi-Fi, but notwithstanding don't have physical access to it to detect the login IP/admin/password, then you notwithstanding take a chance to discover or fifty-fifty guess the login credentials, as there are commonly used login IPs/admin/passwords across router brands that you can guess or look upwardly.

Let'due south list some common values y'all tin can effort:

Router login IP – In the English speaking western earth, the default router login is often 192.168.0.1 or 192.168.one.1 or 192.168.1.254. More than rarely, it may be 192.168.1.2 or x.0.0.1 or some close variant. Try typing in these IP addresses into the browser address bar of any device currently connected to the router. If a pair of admin/password boxes popular upward, you know that this at to the lowest degree is right.
Username/Admin – The default router admin is oftentimes merely admin or ambassador
Countersign – The default router countersign can sometimes be just countersign or password1, but is oft something else nowadays for security reasons, like the router serial number. This can often be the sticking point – you can guess the router login IP and admin, merely tin can't judge the countersign. Only admin and password (modest case) can sometimes work.
Sometimes the admin and password are BOTH 'admin' (common) or BOTH 'countersign' (less common), and so you tin can try this besides.

Here are links to some commonly used login credentials for popular ISPs in the major English speaking countries:

America – Comcast/Xfinity defaults are username/password, see here and hither, Verizon hither, AT&T here. Sometimes the password is 'password' or 'password1'; other times it is a unique value like the serial number of the router, in which you'll need physical admission to become it.
United kingdom of great britain and northern ireland – Click the links for common default login details for BT, Virgin Media, Sky, TalkTalk, Plusnet

Canada – Click the links for Bong, Shaw, Telus and Rogers mutual router login details.
Commonwealth of australia – Click the links for Telstra, Optus and TPG router login details.

Once you blazon in the correct login IP/admin/password, yous should be in the router settings to change them as you wish! You can utilize the router settings to practice many things, including:

Enabling or disabling certain Wi-Fi bands
Prioritizing certain devices on the network
Reserving a static IP/port forwarding for games consoles
Kicking devices off the network or restricting access.
Changing the default Wi-Fi and login credentials
And many more than things.

If y'all are using a specific brand of a router that isn't an Isp supplied one, so merely do an online search for "(router brand/model name) default login details", or something like, to observe login credentials.

Source: https://weakwifisolutions.com/how-to-access-router-settings-without-a-network-cable/